PRODUCTS

‹

4-Axle Side Wall Semi Trailer with Air-Lift Front Axle and Fuwa Axles

›

‹

›

4-Axle Side Wall Semi Trailer with Air-Lift Front Axle and Fuwa Axles

This is a four axle side wall semi trailer — also called a stake body, high-side or fence semi trailer — built for bulk, bagged, palletised and agricultural freight on long highway legs and rough terminal roads. Its running gear is deliberately split: the first axle rides on air suspension with an air lift that raises it when the trailer runs light, while the three rear axles use proven mechanical leaf-spring suspension. All four axles are Fuwa, and the trailer rolls on LINGLONG 295/80R22.5 radial tyres. You get the road friendliness, ride-height control and tyre protection of a air-suspended front axle at a price close to a fully mechanical trailer.
PRODUCT DESCRIPTION

4-Axle Side Wall Semi Trailer with Air-Lift Front Axle and Fuwa Axles

4-Axle Side Wall Semi Trailer with Air-Lift Front Axle and Fuwa Axles

Technical Specifications

4-axle side wall semi trailer — standard configuration
ItemSpecification
Product typeSide wall / stake body semi trailer, drop-side gates, 3 axles mechanical + 1 axle air with lift
Overall dimension13,600 – 16,000 × 2,500 × 3,300 – 4,000 mm. Final dimension follows the approved drawing and your country's length and height rules.
Loading floor3 mm checkered (patterned) steel plate, welded to cross members
Side wallCorrugated high-strength steel panels with drop-side gates and cam-lock latches; panel height configured at 1,800 / 2,000 / 2,400 mm; total body height to customer drawing
Main beam (longitudinals)H / I section, height 500 mm; upper flange 16 mm, web 10 mm, lower flange 18 mm; Q345 high strength steel, submerged arc welded
Side / cross beams18# channel steel side rails; heavy-duty cross members spaced for full pallet coverage
Axles4 × Fuwa, 13 tonne rating per axle as standard (11.5 t / 12 t / 16 t on request)
SuspensionAxle 1: air suspension with air bags and liftable-axle valve. Axles 2, 3, 4: mechanical leaf-spring suspension, spring 90 mm × 13 mm × 10 layers (rigid type)
Air system for the lift45 litre air tank, lift / lower control valve at the side of the chassis, air lines and air bags supplied complete
TyresLINGLONG 295/80R22.5 radial. 8 road wheels + 1 spare = 9 units
King pinJOST 2" or 3.5" bolt-on or welded type
Landing gearJOST A300C or TONGYA 28T two-speed, side or centre mount
BrakingPneumatic dual-line, WABCO RE 6 relay valve, spring brake chambers, front and rear brake lines routed inside the chassis
Electrical24 V, 7-way receptacle, LED marker and rear lamps, side reflectors
ProtectionFront underrun bar, side underrun protection rails, rear underrun bumper, reflective tape to ECE 104 / DOT C2 as required
FinishSandblast, zinc-rich primer, powder top coat and bake; standard colour red, any RAL on request
AccessoriesOne tool box, one spare wheel carrier, winch hooks and lashing points along the side rails
Tare weightTypically 10,500 – 12,500 kg for this configuration; exact figure confirmed on the final drawing
PaymentT/T or L/C; 30% deposit, balance before shipment
Lead time10 – 30 days after deposit, by order quantity; single unit about 2 weeks
ShippingRO-RO, bulk carrier or 40ft flat rack; FOB, CFR, CIF from Qingdao
Figures marked as typical are configuration-dependent. Overall length, body height and tare weight change with the side wall height, axle rating and options you select. We issue a dimension drawing for your sign-off before any cutting starts, and the signed drawing becomes the delivery standard.

Why One Air Suspension Axle with Lift, and Three Mechanical

A four axle trailer sits between two problems. Three axles cannot legally take the tonnage your loaders want to put on them, and four mechanical axles scrub their tyres hard through roundabouts, weighbridge ramps and unloading yards. Splitting the suspension solves both without the price and workshop burden of a full air-ride chassis.

Axle 1: air bags plus air lift

The front axle sits under the gooseneck, where coupling load and road shock are highest and where an impact is most likely to reach the king pin area. Air bags let you tune that corner: raise the chassis to clear a high dock or a rough haul-road entrance, lower it for a low centre of gravity on the highway, and keep the ride softened all day. Because the bag is a lifting axle as well, the driver can raise it out of contact with the road when the trailer is running empty or half loaded. That removes one axle of scrub during tight turns, saves the tyre shoulders, and gives a spare if a front tyre fails on a long desert or mountain route.

Axles 2 to 4: mechanical leaf spring

The rear three axles stay mechanical on purpose. A rigid spring hanger set carries full rated load without depending on air pressure, height valves or a compressor draw from the tractor. It can be re-sprung with hand tools in a village workshop, and it has no air bag, roll-formed beam or level sensor to fail on dusty, corrugated or flood-damaged roads. For a fleet whose maintenance is third-party, this is where the lifetime cost is lowest, and it keeps the purchase price within reach of a fully mechanical competitor.

4-Axle Side Wall Semi Trailer with Air-Lift Front Axle and Fuwa Axles

4-Axle Side Wall Semi Trailer with Air-Lift Front Axle and Fuwa Axles

4-Axle Side Wall Semi Trailer with Air-Lift Front Axle and Fuwa Axles

Axles, Wheels and Tyres: Fuwa and LINGLONG

Both component choices were made for servicing, not just price. Fuwa is the most common trailer axle in the export market, so hub assemblies, drums, brake shoes, cam shafts, oil seals and spare parts are stocked by dealers on every continent where we ship; a mechanic anywhere can identify a failure from a photograph. The LINGLONG 295/80R22.5 is a wide-base low-profile size that runs cooler and wears more evenly than 12R22.5 at highway speed, improves stability through corners thanks to the lower sidewall, and remains one of the most available radial sizes in African, Middle Eastern, Central Asian, Russian and South American ports. Fitment is nine units in total: eight road wheels plus one spare carried on the trailer.

4-Axle Side Wall Semi Trailer with Air-Lift Front Axle and Fuwa Axles

Factory

4-Axle Side Wall Semi Trailer with Air-Lift Front Axle and Fuwa Axles

Exhibition

4-Axle Side Wall Semi Trailer with Air-Lift Front Axle and Fuwa Axles

Workshop
FAQ

Q1、Why choose Tongya Automobile Co.,Ltd ?

1,China leading manufacturer of semi trailer and tanker trailer since 1982,China famous brand, Annual output of 10,000 units different kinds of semi trailers 

2,More than 19 years export experience since 2005, Fully understand different local specs and standard from more than 50 different countries 

3, Customized product is available, with modern and advance production line with all kinds of production equipment and production process

4, Professional technical team with 24 fully experienced engineers


Q2、What can you buy from Tongya Automobile Co.,Ltd?
Bulk Cement Tanker Semi trailer , Fuel Tanker Semi Trailer, Flatbed Semi Trailer, Skeleton Semi Trailer, Lowbed Semi Trailer, Dump Trailer,dolly trailer ,Fence Semi-trailer,Side Wall Semi-trailer, full trailer, Flour tanker trailer, ISO bulk tanker container etc.

 

Q3、Can I visit your factory?
Of course,welcome to visit our factory.we are located in Liangshan, Shandong Province, a face-to-face conversation can serve you better.

 

Q4、How about your delivery time?
10-30 days after receive the deposit, depend on the order quantity.

 

Q5、What payment terms do you use?
 T/T and L/C payment are acceptable.

 

Q6、Which incoterms 2010 terms can we work?

Normally we accept FOB, CFR, CIF.

 

Q7、Is it available to print our own brand on the vehicle?
Yes, we accept to do OEM for well known distributors and dealers.

 

Q8、What information should I let you know if I want to get a quotation?
First, please let us know which kind of trailers you want
Second, Please let us know what kind of cargo that you will load with our trailers? Loading capacity? road condition? 
Third, what trailer size is OK for you, and do you want customized product
Four, your truck specs, like 2.0 or 3.5 inch fifth wheel ? fifth wheel height? 6*4 or 4*2 truck will use ?
Five, order quantity, destination port 
The more information you will provide, the more accurate and competitive price we can offer. 

MESSAGE
Submit
SIMILAR RECOMMENDED